Velux Roof Window Installation in Bromley Homes

A roof-window leak may come from its flashing, an unsuitable installation detail, blocked drainage channels, condensation or a defect higher up the roof. The source should be confirmed before the window is replaced. This guide explains the practical checks a Bromley property owner should make before requesting or approving work.

Quick answer

A roof-window leak may come from its flashing, an unsuitable installation detail, blocked drainage channels, condensation or a defect higher up the roof. The source should be confirmed before the window is replaced.

Maintaining roof windows and skylights

Use ground-level and internal checks, especially after severe weather or when the building has been unattended. Do not walk on the roof. Record changes over time so a roofer can distinguish a new defect from an old stain.

• Keep outlets and visible rainwater routes clear where this can be done safely
• Look for new staining, movement, cracks or displaced components
• Avoid pressure washing, uncontrolled scraping and coatings that could damage the system
• Arrange professional access when a close inspection is required
• Address small drainage and junction defects before prolonged water exposure affects the structure

Expected life is not an expiry date

Published lifespan figures are broad estimates, not guarantees. Installation quality, exposure, detailing, maintenance, movement and previous repairs can make two roofs of the same material perform very differently.

Match the defect to the weather mechanism

Wind can displace loose units and drive rain beneath marginal laps. Prolonged rainfall tests outlets and valleys. Temperature change moves metal, membranes and junctions. The inspection should identify which mechanism fits the evidence instead of describing weather as a catch-all cause.

• Windward edges, ridges and perimeter trims
• Outlets and overflow routes after sustained rain
• Lead and membrane movement points
• Debris collecting behind parapets or in valleys
• New marks after a specific weather event

What should be inspected?

• The window model, age and roof pitch compatibility
• Flashing kit and underfelt collar
• Slates or tiles immediately above and beside the opening
• Internal condensation and ventilation
• Insulation around the reveal
• Planning, building-control and structural requirements for a new opening

Junctions often matter more than the main roof area

London properties frequently combine an older pitched roof with later extensions, dormers or small flat areas. Water entry often occurs where systems meet, so the inspection should follow abutments, parapets, valleys and changes in level.

• Main covering and additions inspected together
• Parapets and shared junctions traced
• Drainage from upper roofs checked
• Earlier repairs identified where visible

Plan access before the repair

A short task is still roof work. Safe access, edge protection and the condition of the surface should be decided before anyone climbs. Ladders are not a substitute for a planned working position, and gutters must not be used as supports. The HSE roof-work guidance explains the main requirements and hazards.

Questions to ask in the quotation

• Is the water entry from rain or condensation?
• Can the flashing be repaired without replacing the window?
• Is the proposed product suitable for the roof covering and pitch?
• Who is responsible for internal making good?

Related local service

For property-specific advice, see Roof repairs in Bromley. The service page explains inspection, access and quotation arrangements.

Frequently asked questions

How are unexpected defects handled?

The quotation should identify likely concealed risks and a variation process. Ask for photographs and approval before additional work is covered or charged.

When is a local repair sensible?

A repair is easier to justify when the defect is isolated and surrounding material is sound. Repeated failure, widespread deterioration or damaged support layers can change that decision.

Can old slates, tiles or fittings be reused?

Sound material may sometimes be retained or reused, but condition, matching, breakage allowance and any planning constraints should be assessed before promising a quantity.

Discuss your roof with a local roofer

For an inspection and written quotation in Bromley, call 020 3886 3911 or email yourbromleyroofers@gmail.com. Describe the property, the roof area and any visible leak or damage. Photographs taken safely from ground level or inside the loft can also help.